Gebraucht IMA BIMA 410 V 2000 Bearbeitungszentren Zum Fräsen, Sägen, Bohren, Kantenanleimen, -nachbearbeiten Zu Verkaufen Spanien

  • Angebot
    18300662
  • Datum
    2021-09-23
  • Status : abgelaufen

Produkt

Kategorietyp CNC Bearbeitungszentren
Kategorie Bearbeitungszentren zum Fräsen, Sägen, Bohren, Kantenanleimen, -nachbearbeiten
Marke IMA
Modell BIMA 410 V

Spezifikationen

Zustand des Produkts Gebraucht
Herstellungsdatum 2000
Volumen 1 Konvertieren
Beschreibung
CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING:

* Industrial machine with heavy-duty structure
*Working area axes "X","Y", "Z" axes: 4000 mm - 1200 mm - 100 mm
*Travel speed axes "X","Y": 100 m/min - 80 m/min
*Linear speed axis "Z": 25 m/min
* 2 Working areas
* 8 movable work tables to support the panels - approx lenght each 1200 mm
* 23 SCHMALZ suction cups with vacuum system for the locking of the working piece
* 4 loading device through pneumatic bars assembled on the work tables that lift the pieces
* 1 vacuum pump

BORING UNITS:
* 7 independent spindles for vertical boring in "X" direction
* 5 independent spindles for vertical boring in "Y" direction
* 9.000 rpm

ROUTING UNIT:
* 1 electro-spindle in vertical position- 10 HP - automatic change of the tool - "C" VECTOR AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control. 0-18.000 rpm
*Rear tool changer magazine with 12 positions

EDGE BANDING UNITS:
*Automatic device to apply the edge into straight profiles of shaped panels
*Applicable banding material in coils: thin edge and PVC up to 3 mm *Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller
*Lamp zone to pre-heat the side of the panel
*Multiple magazine for edge coils with 2 positions, to automatically change the edge type
*Top and bottom edge trimming head-unit
*Top and bottom edge scraping head-unit

CONTROL OF THE MACHINE:
* IMATRONIC - software IMAWOP
* Command board installed on a separated electrical cabinet to control the machine
* Security norme CE mark
* Protection enclosure of the working units
* Protection grids

OPTIMAL CONDITION. FULLY REVISIONED

Preise & Konditionen

Preis Auf Anfrage
Verkauft bevorzugt in allen Ländern

Verkäufer

Es tut uns leid, dieses Angebot steht nicht mehr zur Verfügung. Aber das ist nicht tragisch! Bitte füllen Sie das Feld unten aus und Sie erhalten etliche ähnliche neue Geschäftsmöglichkeiten

 Ich bestätige, dass ich die Datenschutzerklärung von Fordaq gelesen und verstanden habe

Mit Ihrer Anmeldung erklären Sie sich mit Unseren AGB

Ähnliche Anzeigen anderer Mitglieder
Angebot 05 Jan 2024 04:00

CNC-Bearbeitungszentren

aus Mercator S.R.L.
Angebot 26 Dec 2021 16:26

Fenstersatz Fräskopfe EU110mm LEUT

aus OPTIMALL, s.r.o. Ing. Roman Kurila
Angebot 26 Jan 2024 04:00

CNC Bearbeitungszentren BULLERI Gebraucht

aus Mercator S.R.L.
Angebot 18 Mar 2024 11:29

CNC Bearbeitungszentrum

aus VKM GmbH
Das Fordaq Trust Rating setzt sich aus den überprüften Informationen über diese Firma zusammen. Alle Informationen über diese Firma werden von uns überprüft und Schrittweise erweitert. Je mehr Informationen wir verifizieren konnten, desto höher fällt das Rating aus.

Informationen aus welchen wir das Rating bilden:

  • Kontakte mit der Firma:
    Anzahl der telefonischen Kontakte, Vorort Besuche der Firma durch unsere Mitarbeiter und Treffen auf Messen.
  • Aktivitäten der Firma auf Fordaq
  • Verifizierte Zertifikate von anerkannten Dritt-Anbietern (FSC, PEFC, etc.)
  • Fordaq hat die Mitgliedschaft in einem anerkannten Verband positive überprüft.
  • Wurde die Firma von anderen Firmen empfohlen?